 |
Roof Rack as shipped
Installation requires a T25 torx driver.
(A ladder wouldn't hurt either.) |
|
Mounting parts |
|
Mounting cover. There are 3 on each side of the Element's roof. The 2 smallest ones are not used for this install. |
|
Pop up the covers carefully and put them in your "Element Parts - Do Not Discard" box. |
|
Mounting surface revealed. Arrow indicates rubber sealing strip - centered in relation to the 3 screws. |
|
Rack (front) in position on roof |
|
Insert screws loosely on both sides of rack. |
|
Make sure everything is aligned & tighten. |
|
Snap on end caps.
Total time: about 30 minutes. |
|
