 |
Seatback Bungee v1
• 10' of 1/4" yellow bungee. Purchased here. ($15/100' roll)
• 4" wire ties from Home Depot. |
|
Bungee loosely woven through seatback loops. (Not very imaginative - looks like a shoelace. Where's Spiderman when I need him?) |
|
Start with a couple of temporary ties to get everything positioned. Stretch the bungee and tighten the ties until it's how you want it. |
|
Add final ties and tighten them with a pliers. Cut off the first ties if they have shifted out of position. |
|
Snip off the excess Bungee. |
|
Melt the ends a little with a lighter so they don't fray |
|
Add two final ties at the ends. |
|
Snip off all excess tie material. |
|
Finished installation |
|
Real finished installation
v2 |
|
